Boots CS-1000 Uživatelský manuál stáhnout pdf (Strana 20)

QT; Reviewed:

SPOC 9/1/2011

Solution & Interoperability Test Lab Application Notes

20 of 36

AscomDectCS1K75

5.9. Create a SIP Line Route Data Block (RDB)

On the EM page, navigate to the menu Routes and Trunks -> Routes and Trunks; the Routes

and Trunks page appears (not shown). In this page, click on the Add route button next to the

customer number that the route will belong to.

The Customer ID, New Route Configuration page appears, expand the Basic Configuration

tab, and enter values below and as shown in Figure 17 and 18.

- Route Number (ROUT): 3

- Trunk type(TKTP): TIE

- Incoming and Outgoing trunk (ICOG): IAO

- Access Code for Trunk group (ACOD): enter a number for ACOD, for example 7575.

- The route is for a virtual trunk route (VTRK): Checked.

- Zone for codec selection and bandwidth management (ZONE): 4, this is the Virtual

trunk zone number that created in the Section 5.8.

- Node ID of signaling server of this route (NODE): 512, this is the node ID of the SIP

Line.

- Protocol ID for the route (PCID): SIP Line (SIPL).

- Integrated services digital network option (ISDN): checked.

- Mode of operation (MODE): Route uses ISDN Signaling Link (ISLD).

- D channel number (DCH): 4, the D-channel number that was created in the Section 5.5.

- Interface type for route (IFC): Meridian M1 (SL1).

- Network calling name allowed (NCNA): checked.

- Channel type (CHTP): B-channel (BCH).

- Call type for outgoing direct dialed TIE route (CTYP): CDP.

- Calling Number dialing plan (CNDP): CDP.

Leave default values for The Basic Route Options, Network Options, General Options, and

Advanced Configurations sections.

Click the Submit button to complete adding the route and save configuration.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Žádné komentáře

Boots CS-1000 Uživatelský manuál Strana 20